Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is a new pen that was developed by two guys in California. They wished to develop a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.
The Smok Pen has a built quality that’s just great. I came across that even though it can be an electronic pen the construction is just as good as any of the pens that I have reviewed. For the reason that of how they made the very best cap. You don’t need to worry about the cap cracking or breaking on you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens is the shape of the coils and just how that they are built. In general the coil on a Smok Pen is larger than on other pens. I believe that they did this deliberately, to help make the pen feel more substantial.
If you take a glance at a Smok Pen, you will notice that your body of the pen is round rather than smooth like other pens. On the trunk of the pen there is a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on / off. I really liked this feature since it allows me to utilize the Smok Pen 22 whenever Personally i think like smoking.
To utilize the Smok Pen it is advisable to keep the heat button pressed. Once the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature you can switch off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.
When you put your Smok Pen into the tank you will see a indicator light seriously. The indicator light will stay green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen into the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.
Once you have completed this step, it is best to check to see when you are at the right temperature for the coils to fire. If not then you should turn the energy off and try again. For anyone who is still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just usually do not work as they should. It is suggested that you perform the following two steps, then go ahead and check the Smok Pen to see if it still gets the electronic charging port.
Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. Once you have loosened this wire after that you can access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful to not touch the coils.
Once you have placed the sub-ohm tank into the pen you should then place the rest of the components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You need to place the pen’s battery in to the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has already reached the temperature that it needs to reach you need to then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s on / off switch.
After all of the components have been placed into the pen, you should turn the power on. After the first test run, you ought to be able to start to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to take away the battery from the pen and replace it with a fresh one. For your convenience there is also vapinger.com a green light which can be pressed so that you can confirm the battery charging status. When you have done these things and you also do not see the green light indicating charging, you need to replace the battery.